Vanessa Stacy

The things that are required to apply grip tape to your longboard involve: Skateboard Deck, Skateboard Grip tape, File, using a Razor Blade or Box Cutter. The following are the methods on applying grip tape accordingly: sector 9 longboard skateboard • Detach the paper on the grip tape. This will leave you the sticky area. •You can protect your hands from the sticky area by holding it with a piece of the backing paper. •Slice the grip tape slightly greater than the board by pinpointing its midpoint. You can let the grip tape hang on a bit in the focal area of the board. This is to make sure that the grip tape on the middle of the board would stick. Once the tape has stuck on the middle, you need to make sure that you meticulously stick on the edges and this has to be carried out from the middle onwards. Because this is really sticky, remember that you have to handle this very carefully. loaded longboard skateboard •To be able to scratch the outer vicinity in the deck in the longboard, you want to utilize a metal file or even the metal region of your screwdriver. Make sure that you firmly rub these constantly until you have removed all the grains. This would ensure that there is a white outline which is visible within the grip tape which would help in sketching the limits of the board. •Using a cutter or razor blade, you position this 45 degree and cut upward to remove excess grip tape. Ensure that you start the process at the nose or tail. Soon after this, go alongside the white outline and transfer the blade just alongside the corner from the skateboard to remove excess grip tapes. sector 9 longboard •You’re able to use the metal file to amount all irregular edges just with regard to the sides in the longboard.•Last but not the least, you need to use the screwdriver to push holes from the grip tape where the trucks are located.